Find Aluminum Mold Bicycle Hubs, Aluminum Molds Bicycle Hubs, Aluminum Bicycle Hubs on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Sealed Ball Bearing > Aluminum Die Casting Bicycle Hubs

Aluminum Die Casting Bicycle Hubs

  • Aluminum Die Casting Bicycle Hubs
  • Aluminum Die Casting Bicycle Hubs
  • Aluminum Die Casting Bicycle Hubs

Aluminum Die Casting Bicycle Hubs

    Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF
    Delivery Time: 30 Days
    Transportation: Ocean,Land,Air
    Place of Origin: china ningbo
    Port: Ningbo

Basic Info

Model No.: 75

Product Description

Bicycle Hubs

The Hub IS The Central Part of your Bike apos Wheels (Front and REAR), to Which the Connects The RIM Wheel apos Via The Spokes and through Which The Axle IS Fitted, Enabling The Wheel Spin Freely to ON TWO sets of Bearings.

Bearing type: Good-quality bearings, sealed and protected from dirt and water, are the key to long and healthy hubs. Older or less expensive hubs may use cup and cone bearings, which contains two rings of loose Ball bearings that sit in 'cups 'inside the hub body, and are secured in place by conical nuts known as' cones'. The balls can rotate freely between the cup and cone with each unit making up one bearing.

Cup and cone bearings have the advantage of being easily serviced at home – new bearings and a dollop of grease once in a while are all you need to keep them running smoothly – but they can be tricky to adjust perfectly. More expensive hubs may use cartridge bearings , where the steel balls or needles rotate in a single cartridge unit that can be easily removed for servicing or replaced once worn out. Many riders prefer the convenience of cartridge bearings – no more tedious micro-adjusting or hunting for stray Ball Bearings mid- service – but they are more expensive to replace.

• Materials: Most MTB hubs, front and rear, will be made of lightweight aluminium alloy although carbon fibre units are available at the top end of the market. Rear hubs for trail, jump and gravity bikes may use steel rather than aluminium freewheels to prevent the softer alloy splines being chewed up by the cassette under heavy load.

• Brake rotor compatibility: Bikes running disc brake systems need hubs to which the disc rotor can attach. There are two main standards for rotor mounting, six-bolt and Centrelock . As the name suggests, six-bolt systems have hubs with six evenly- spaced holes to bolt on a matching rotor. Rotor bolts generally use Torx heads so you will need to make sure you have a Torx tool to tighten or loosen them – don't try to fudge the job with an Allen key or you will risk stripping the bolts.

The Centrelock system used by Shimano foregoes rotor bolts in favour of a splined hub-rotor interface secured with a locking ring (special tool needed). This is claimed to reduce installation time but it does put limits on mixing and matching hubs and brakes as most other manufacturers stick with the six-bolt system. Again however, adaptors are available to mount six-bolt rotors to Centrelock hubs, and vice-versa. Before investing in new hubs check which disc interface you are currently using and buy accordingly.

• Axle size (front): You must also ensure that your hubs are compatible with your fork axle. Many entry-level or shorter-travel cross-country forks attach to the hubs via quick-release (QR) skewers, with a 9mm diameter axle clamped into the fork and frame dropouts via a 5mm QR skewer. However recent years have seen the growth of the 'bolt-through' or 'thru-axle' standard on MTB front forks for trail, enduro and gravity riders. This uses a larger-diameter (12mm, 15mm or 20mm) axle for extra stiffness and security, with the axle threading right through the fork ends and being secured by two QR clamps integrated into the fork lowers.

If you intend to upgrade your wheels make sure the hubs match whichever axle standard you are using, or alternate consider hubs that can switch between QR and bolt-through with the insertion of a simple adaptor to enable the wheels to be used with different fork types .
• Axle size (rear): Rear hubs are sized according to the diameter and length of the rear axle (measured in millimetres). The standard MTB rear axle dimensions are 135x5mm (for a QR rear hub) but jump and gravity bikes may use wider and thick axles for extra strength and stiffness, with the available sizes being 135 × 10, 142 × 12, 150 × 12, 157 × 12 and 165 × 12. Ensure your rear hub is the correct size to fit your frame.
• Rims: If choosing a new hub to rebuild a wheelset you will need to match the number and type of spoke holes on the hub's flange to the number and type of spoke holds drilled into the rim, eg a 32h hub is designed for a 32 -spoke wheel, and needs to be matched to a 32h rim.


Bicycle Hubs

Ningbo Jinyao Machinery Company. LTD

 

Founded in 2007, Jinyao Machinery is a professional mold manufacturing enterprise specializing in all kinds of difficult aluminum alloy die-casting molds, plastic parts , Children toys ,magnesium alloy die-casting molds, plastic molds, design, development and manufacturing, especially in aluminum alloy die-casting molds. All kinds of aluminum alloy die castings. The company has a high-precision CNC machining center, which is equipped with several general-purpose processing equipments for numerical control EDM machine and CNC wire-cutting machine, which improves the quality and delivery time of the mold. At the same time, it adopts CAD/CAM/CAE technology to design, manufacture and process the mold. The annual production capacity is up to 250 sets. 9 sets of die casting machines 1600T, 1250T, 1000T 800T/2, 500T, 280T, 180T.

Jinyao Machinery adheres to the tenet of [tree corporate image, quality management, satisfying customers and fully implementing the maximum expectations of TS16949:2009 quality system standards", and actively introduces a large number of technical talents with excellent quality management and rich experience in mold design and manufacturing. With the strong support of domestic and foreign customers, our company has further developed. Mr. Yao Xiulong, the general manager, expressed his heartfelt gratitude to the leaders and colleagues who have always cared for the development of the company. He sincerely hopes to cooperate with all parties to create a beautiful tomorrow!

Company Info

  • Company Name: Ningbo Jinyao Machinery Company. LTD
  • Representative: yao xiu long
  • Product/Service: Aluminum Accessories , plastic parts Children toys , Die Casting Mold , Zinc Kitchenware Accessories , car spears , House Hold
  • Capital (Million US $): $11.8 million
  • Year Established: 2007
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
  • No. of Production Lines: 12
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 30,000-50,000 square meters
  • Factory Location: no.226 tianshan road beilun district
  • Contact Person: Mr. Alex Micheal
  • Tel: +86-1586-7464794
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters