high speed low noise ceramic bearing 608

High speed low noise Ceramic bearing 608
Deep Groove Ball Bearing is the most commonly uesd bearing in industry. It consists of an inner and outer ring and aset  of balls separated by a cage. This bearing can acommodate radical and a ombination of light radical and axial  loads. Deep groove ball bearing type has a single row and double row two kinds, deep groove ball structure is  sealed and open two kinds of structure, open without sealing structure refers to the bearing, seal type deep  groove ball into dust seal and oil seal. Dustproof cover gasket material for sheet metal, only simple prevent dust  from entering the bearing raceway. Oil type for the contact seal, can effectively prevent the grease within the  bearing  

1. The Details of 608 Bearing

   

fig1	Ceramic Bearing 608 are the most widely used bearing type. Consequently, they are available from TIANHE in many executions and sizes:

  open basic desigh Bearings (fig2) sealed bearings (fig3)) ICOS oil sealed bearing units (fig4) bearings with snap ring groove, with or without snap ring (fig5)
                                                                                                                                Other deep groove ball bearings for special applications, shown in the Engineering products and Mechatronics sections, include:  hybrid bearings (fig6) insulated bearings (fig7) high temperature bearings (fig8) bearings with Solid Oil (fig9)
  ceramic bearing 608 (fig 1) are particularly versatile. They are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.      Deep raceway grooves and the close conformity between the raceway grooves and the balls enable Miniature Ball  Bearing to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.  

2.   Ceramic bearing 608

 
 

3.608zz Bearing Description

 

Quality Standard:	ISO9001:2008 quality management system
Features:	1)Precision: ABEC-1(P0), ABEC-3(P6), ABEC-5(P5), ABEC-7(P4)
	2)Noise level: Z1, Z2, Z3, Z4
	3)Vibration Level: V1, V2, V3, V4
	4)Clearance: C2, C3, C4, C5
	5)Hardness: 59-63 HRC
Greese:	As your requirement, such as SRL, PS2, Alvania R12 and so on.
Technology & QC Process:	1. Assembly
	2. Windage test
	3. Cleaning
	4. Rotary Test
	5. Greasing and gland
	6. Noise Inspection
	7. Appearance Inspection
	8. Rust Prevention
	9. Product Packaging
Application:	Auto, tractor, machine tool, electric machine, water pump, agricultural machinery and texile machinery ect.
Service:	We will follow up on our customers' feedback and suggestions after every delivery and we make every effort to solve their problems in order to ensure their total satisfaction.

   

4.  Ceramic bearing 608 Size

 

Bearing Number	Boundary Dimensions(mm)				Basic Load Ratings(kN)		Limiting Speeds	Mass(g)
TIANHE	d	D	B	rs min	Cr	Cor	rpm	(Approx.)
606-ZZ	6	17	6	0.3	2,190	865	35,000	6
607-ZZ	7	19	6	0.3	2,240	910	34,000	8
608-ZZ	8	22	7	0.3	3,350	1,400	32,000	12
609-ZZ	9	24	7	0.3	3,400	1,450	31,000	14

        RS:On one side with seals(contacting)         2RS:Two side with seals(contacting)               RZ:On one side with seals(Non-Contact)     2RZ:Two side with seals(Non-Contact)         Z:On one side of the dust cover                    ZZ:Two side with dust cover         N:Outer ring with locking slot                         NR : Outer ring with snap ring         M:Solid brass cage                                        TN:The nylon cage    

5.  Ceramic bearing 608 Compared

  TIANHE Bearing Advantage

1. Material Advantage
All the material for TIANHE bearing are from the best suppliers in China.

2. Processing Advantage
we can guarantee the time spent and quality of every processing. We can do three times tempering to stabilize the dimensions of the bearings, which is quite different from other bearings manufacturers. 

3. Quality control advantage
All the Bearing parts are 100% strictly inspected before and during production including Metallurgical testing, crack detection, roundness, hardness, roughness and geometric dimensions.             4.All of bearings meet the ISO international standard.
5. Appearance Technology Advantage
we can provide light chamfer, black chamfer, black chamfer of the rollers. The bearings are produced all according to customer’s requirements.   6. Service Advantage
Your satisfaction is our biggest goal. From quotation to the final packing and transport, we provide the quickest and most satisfactory services to every customer.  

6.  Ceramic bearing 608 Family Models

    Single -row deep groove Ball Bearing       Double -row deep groove Ball bearing       Sealed deep groove ball bearing       Open deep  groove ball bearing    

7. The Applications of bearing

    1) industry: instrumentation, internal combustion engines, construction machinery, railway vehicle, loading and unloading handling machinery, agricultural machinery, all kinds of property   2) electric industry: the general idea, household electrical appliances   3) in the auto industry: rear wheel, transmission, electrical installation components    

8.  How to use ceramic bearing 608?

  TIANHE Bearings are precision parts which ought to be treated cautiously. Sometimes even though high-performance bearings cannot reach the expected effects when handled in wrong ways. So the notes below should be paid attention:
  The installation method :    First is to make the bearing inner ring work closely with the shaft, the outer ring and bearing hole is relatively loose fit, and then press the bearing to be pressed on the shaft, then put the shaft and bearing pack together.     Firstwhen pressed a soft metal (copper or mild steel) materials for the casing assembly, when the bearing outer ring and bearing hole close coordination, inner ring and the shaft is loose fit, the bearing pressure into the bearing hole when assembling casing diameter should be slightly less than the diameter of a hole.     If the bearing ring and shaft and hole is a tight fit, install indoor ring and outer ring to pressure into the shaft and hole, at the same time assembling casing structure should be able to at the same time, so the bearing inner ring and outer ring end face.        

9. Ceramic bearing 608 Packing&Shipping

  1.Industrial packaging:
a) Plastic bag +carton +pallet
b) Plastic bag + kraft paper +carton +pallet     2. Commercial packaging: 
a) Plastic bag+ color paper+ carton+ pallet     3. According to the requirement of customers          

10.  Ceramic bearing 608 Shipping & Payment Details

  Shipping:
1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient )
2) Between 45 - 200 KGS, we will send by air transport. ( Fastest and safest, but expensive )
3) More than 200 KGS, we will send by sea. ( Cheapest, but long time )   Payment:
1) TT, 30% deposit , 70% before shippment.
2) L/C at sight. (high bank charge, not suggest , but acceptable )
3) 100% Western Union in advance. (specially for air shipment or small amount)        

11.  Ceramic bearing 608 Facotry

        Ceramic bearing 608 Supplier That You Can Trust
Our highly skilled Bearings Specialists have over forty years experience in the Industry. We have the resources and knowledge to get you exactly what you need. Providing world class service is our  priority. At TIANHE Bearings, we have a motto that we are proud to stand by, That is, if we don't have it, we will find it. If we can't find it, we will make it.        

12. Tianhe customers

  Tianhe provides quality precision bearings of all types at the lowest possible cost. We inspect bearing quality to assure they perform exactly as specified. This is how we have run our business for over 30 years. It's the reason for our success and continuing growth. Please visit our online catalog of bearings.       TIANHE Bearings is your source for the following types of bearings and bearing attributes.  
       

13. ceramic bearing 608 FAQ

  Q:What's my consideration when I choose ceramic bearing 608?
A:- The type and size of bearing you need.
- The quality or application you prefer.

Q: What's TIANHE Bearing  ceramic bearing 608 advantage.
A: - Substantial inventory, unified quality control,save much cost and time for customers.

Q: What's your guarantee on ceramic bearing 608 quality problem?
A: - Free to change in 2 month and in your next order,10% value of order can be paid after receiving goods and checking out no quality issues.

Q:What are the benefits of being a TIANHE ceramic bearing 608 distributor?
A:-Special Discount
-Marketing Protection
-Priority Delivery than other orders.
-Point to point technical supports and after sales services.

Q:How can I become a distributor of TIANHE ceramic bearing 608 ?
A: Contact us immediately for further details by sending us an inquiry.    

14.  ceramic bearing 608 Supplier

   "We understand what you said and what you didn't said"

  You will be our VIP customer with round-the-clock service.Solve your worries .     We work from 8:30 till 18:00(GMT+8:00) without break,on Saturday from 10:00 till 15:00(GMT+8:00),day off is  Sunday.       if you have any interest in 608ZZ bearing, plz don't hesitate to send us enquiry in the box below.  

Contact us if you need more details on Ceramic Bearing 608. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Low Noise Ceramic Bearing 608、High Speed Ceramic Bearing 608. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Deep Groove Ball Bearings